20th Century Seating
KAARE KLINT ‘RED’ ARMCHAIR - MAHOGANY, NIGER LEATHER
designed in 1930, executed in 1935 by Rud. Rasmussen A/S, Denmark manufacturer’s paper label and architect’s monogrammed paper labelunder seat frame: RUD. RASMUSSENS SNEDKERIER 45 KØRREBROGADE 158_ _(?) Overall dimensions:...
Learn More
$0.00
NAGALAND JACKWOOD TABLE/BED
of massive singular hand carved shaped and molded slightly irregular rectangular form, the larger end with Great Hornbill style beaks across the length, carved in high relief; the whole contiguous...
Learn More
$0.00
S/4 FRENCH “AVIATION” IRON SIDECHAIRS
each with concave shield back, joined to attached upholstered box cushion, raised on “T” section scrolling “C” form back leg with progressive circular piercing ending in fin foot, the front...
Learn More
$0.00
PAIR FRANK LLOYD WRIGHT OAK SLANT-BACK SIDE CHAIRS
each with planar construction and strict geometric elements adhering to the principals of his Prairie School style architecture with diagonal rectangular section back panels, flanked by square section legs, surmounted...
Learn More
$0.00
PR. KRISTIAN SOLMAR VEDEL PALISANDER AND LEATHER ARMCHAIRS
For MODUS - Denmark Kristian Solmar Vedel (1923-2003) Greatly influenced by Kaare Klint, the father of modern Danish furniture design, as well as the German Bauhaus school. His now classic...
Learn More
$0.00
PAIR RATTAN ARMCHAIRS
attributed to Franco Albini, the flaring concave back with contiguous finials on conforming bucket seat, joined by duel outward flaring arms contiguous with front and back legs, joined by perimeter...
Learn More
$0.00
NORMAN BEL GEDDES ALUMINUM AND WOOD STOOL
in the “Industrial Style” with oval later upholstered seat over conforming wood apron, flanked by concave straight legs CA 1930 - USA Overall dimensions 15” deep x 22” wide x...
Learn More
$0.00
FAUX BOIS CEMENT ARMCHAIR
of naturalistic moulded and shaped form with downward curving crest rail and similar central splat, rising to flaring, nearly straight arms, to circular section moulded and shaped seat with conforming...
Learn More
$0.00
KRISTIAN SOLMAR VEDEL CHESTNUT AND LEATHER ARMCHAIR
for MODUS - Denmark CA1960 - very fine condition Overall dimensions: 25” deep x 28” wide x 30” high Kristian Solmar Vedel (1923-2003) Greatly influenced by Kaare Klint, the father...
Learn More
$0.00
KAARE KLINT ATTRIBUTED “NØRREVOLD” MAHOGANY AND NIGER LEATHER ARMCHAIR
model no. 5999, for Rud Rasmussen, designed in 1939 and the largest chair in the series of “Red Chairs” that Kaare Klint designed between 1920-1930 - brass nailhead trim CA...
Learn More
$0.00
PR. VITTORIO DASSI MAHOGANY AND PARCEL GILT BERGERES
each rectangular tapering leather upholstered back with contiguous rolled arms and “U” shaped seat with loose boxed seat cushion; the whole embraced by wide mahogany back brace raised on circular...
Learn More
$0.00
Pr. FRANCESO TALIN IRON FRET ARMCHAIRS
the whole consisting of rectangular and square pierced panels, one creating the back within circular section tube frame, joined to similar pierced seat and flaring arms contiguous to the floor;...
Learn More
$0.00
PR FRENCH MODERNE MAPLE BENTWOOD AND IRON ARMCHAIRS
each with contiguous scrolling rectangular back and seat the sides secured with circular section “D” shaped arms contiguous with legs CA 1930 - maker unknown Overall dimensions: 26” d...
Learn More
$0.00
FRENCH MODERNIST CHESTNUT AND STEEL ARMCHAIR
the rectangular pitched back consisting of rectangular section slats, joined to similar seat and back foot-rail extending to the floor, with contiguous square section straight arms, extending to the floor,...
Learn More
$0.00
PIET BLOM BASTILLE CHAIR
of lacquered beechwood, edition of 400 (less than 200 remaining), few in original condition like this one; manufacturer’s name on metal caps :Huizinga Utrecht Provenance: University of Twente, Enschede, The...
Learn More
$0.00
PR. BERT ENGLAND MAHOGANY, BRONZE AND CANE ARMCHAIRS
each with upside down concave trapezium shaped caned backs within thin rectangular section bronze frames, suspended from flaring circular section tapering arms contiguous with flaring back leg and straight front...
Learn More
$0.00
PAIR FRENCH CLUB CHAIRS
each scalloped crest rail contiguous with back, enclosing “U” shaped tight upholstered seat and inside back with downward sloping arms over conforming apron; the whole raised on bracket feet and...
Learn More
$0.00
FRENCH CAST CONCRETE CHAIR
the rectangular scoop back with rolled edge on circular section stem, raised on flaring circular section base
CA1950
Overall diameter of base: 20 1/2” x 29” high
Download Tearsheet
Learn More
$0.00
ARNE NORELL ROSEWOOD AND LEATHER ARMCHAIRS
model Sirocco designed by Arne Norell, produced by his own company Mobel AB Arne Norell, in Aneby, Sweden 1960-1969 Overall dimensions: 26” deep x 26 1/2” wide x 28” high,...
Learn More
$0.00
FAUX BOIS CEMENT SIDECHAIR
of realistic form, the horseshoe solid back, contiquous with circular seat, over conforming circular section hollow base and foot; the whole enriched with faux bois decoration and retaining patination from...
Learn More
$0.00
IN THE MANNER OF PERCIVAL LAFER OAK AND NAUGAHYDE SLING SETTEE, LOUNGE CHAIR AND OTTOMAN
the settee and chair with rectangular section legs with gently rounded arms, domed screw plugs and fitted with tufted beige upholstery on sling construction; the ottoman of similar construction and...
Learn More
$0.00
“TAMARA” CHROME AND LEATHER FOLDING CHAIR BY ARRBEN
the hinged flattened tubular section contiguous “A” frame, with rounded corners at the front of the seat and at the foot fitted with stitched black leather strap back and seat...
Learn More
$0.00
TITO ANGOLI CA1960
Woven wicker on tubular lacquered steel frame
Model: P3
For Banacina – Italy
CA1960
Overall dimensions 37”D x 24”W x 261/2”H
Download tearsheet
Learn More
$0.00
D PARCEL PAINTED “PUZZLE” ARMCHAIRS
CA1985 - San Francisco - Limited Edition Metallic label under seat: Puzzle design: Kawescki patent pending 3D: interiors San Francisco Overall dimensions: 25" d x 30" w x 33"...
Learn More
$0.00
PIERRE PAULIN BUTTERFLY CHAIR MODEL 675 ARTIFORT
matte chrome plated steel, cowhide
France – 1963
Literature: Pierre Paulin: Un Univers de Formes, Chapoutot, pg.42
Download tearsheet
Learn More
$0.00
PAIR BENTWOOD CERUSED OAK ARMCHAIRS
the rectangular gently curved hinged back with tight upholstered panel, joined to similar upholstered seat by scrolling shaped rectangular section arms, raised on similarly shaped leg base, joined by paired...
Learn More
$0.00
MAHOGANY AND PART EBONZED TABORET
in the manner of Jules Leleu, the shaped edgebanded saddle seat of classic form on four octagonal supports with alternating chevron veneers, raised on circular platform Circa 1930 – France...
Learn More
$0.00
FRENCH EBONIZED AND LEATHER ARMCHAIR
the horse shape crest rail with attached tapering back fitted with upholstered panel joined to upholstered seat and raised on square section straight supports CA1970 Pascal Mourgue Overall dimensions: 28...
Learn More
$0.00
CARLO DE CARLI “LA PIPA” BERGERE
the rectangular back with shaped sides contiguous with seat, flat conforming leather upholstered arms; the whole raised on chrome plated circular section flaring legs and fitted with button tufted cushions ...
Learn More
$0.00
ADJUSTABLE PINE AND PAINTED IRON STOOL
CA 1930
Belgium
Overall dimensions: 19” Diameter x 18” to 23” High
Download Tearsheet
Learn More
$0.00
